Phenol 2% in Compound zinc paste

Edible coating and film from chitosan and incorporating it with the action of ZnONPs on active phenol compounds from extracts of pomegranate peel (PPE) The physical and chemical properties of edible films composed of zinc oxide ZnONPs and active phenol compounds extracted from pomegranate peel (PPE) were investigated. Adding ZnONPs with active phenol compounds from extracted pomegranate peel(PPE) to chitosan films can provide safe edible films, decrease microbial growth and consequently prolong the shelf life of pomegranates, as well as improve the physiochemical stability of the pomegranate. The substances used in this experiment were film with a (A) extract of pomegranate peels (PPE), 5% (0.1%), (B)ZnONPs 1% (0.02%), (C) ZnONPs 2% (0.04%), (D) ZnONPs 3% (0.06%), (E) ZnONPs 1%/PPE1% (0.02%), (F) ZnONPs 2%/PPE2% (0.04%), (G) ZnONPs 3%/PPE3% (0.06%) wt% of chitosan on quality attributes and prolonging the shelf life of pomegranates were stored in plastic containers at 2 °C and 90-95% relative humidity for 20 days. The treatments of (G) ZnONPs 3%/PPE3% (0.06%) loaded on chitosan as well as chitosan and (D) ZnONPs 3% (0.06%) reduced the weight loss, had excellent microbial count until 20 days of storage, and recorded the lowest microbial count and mould & yeast colonies. Other chemical properties, such as total soluble solids content, acidity, anthocyanin content, firmness, and ascorbic acid, were investigated. Results indicated that ZnONPs 3%/PPE3% (0.06%) loaded on chitosan or ZnONPs 3% (0.06%) are the best treatments for preserving pomegranate arils. It was found that the best measurements were that the film-forming nan emulsion solutions decreased by E% 110 nm and B% 134 nm. Nano followed treatment, F% 188.7 nm, compared to nano edible films, which were A 0% 1312 nm.

Abstract licence: CC BY

In this study, the photocatalytic degradation of phenol, which is commonly found in industrial wastewater at high rates, was investigated using a zinc oxide (ZnO) catalyst. It is thought that our findings will contribute to the removal of phenol in industrial wastewater. The experimental study was conducted in a batch-type air-fed cylindrical photocatalytic reactor, and a central composite design (CCD) was chosen and analyzed using response surface methodology (RSM). The study aimed to explore the effects of initial phenol concentration, catalyst concentration, airflow rate, and degradation time on the photocatalytic degradation of phenol and the removal efficiency of total organic carbon (TOC). A quadratic regression model was developed to establish the relationship between phenol degradation, TOC removal effectiveness, and the four factors mentioned. The validity of the model was assessed through an analysis of variance (ANOVA). A good agreement was observed between the model results and the experimental data. As a result of the experiments carried out under optimized conditions, the degradation percentage of phenol was found to be 77.15 %, and the degradation percentage of TOC was 59.87 %. Additionally, pseudo-first-order kinetics were used in the photocatalytic degradation of phenol.

Abstract licence: CC BY

In this study, we evaluated the potential of Lantana camara L. ( L. camara L.) fruit extract as a biogenic mediator for the synthesis of enzyme-rich zinc oxide nanoparticles (EZnO) aimed at the detoxification of phenol and its derivatives. The protein extraction yielded a maximum concentration in the 80 % cut fraction, with a protein concentration of 0.96 μg/ml. The highest peroxidase enzyme activity was measured at 41 U/min at 80 % cut using a 250 μg protein concentration, while the highest polyphenol oxidase activity of 7.16 μg/ml was observed in the 40 % cut fraction. The synthesis of EZnO nanoparticles was confirmed through a visible color change and UV–visible spectroscopy with a distinctive absorbance peak at 307. 40 nm. X-ray diffraction (XRD) analysis at 2θ angle indicated the crystalline structure of the nanoparticles, with characteristic peaks corresponding to the planes of the ZnO crystal lattice. Fourier-transform infrared spectroscopy (FTIR) characterization revealed the embedding of the peroxidase enzyme within the nanoparticles, evidenced by absorbance peaks at 1708.62 cm −1 corresponding to amide I, 1604.48 cm −1 corresponding to amide II, and 1380 cm −1 corresponding to amide III. Similarly, the presence of polyphenol oxidase was indicated by absorbance peaks at 3185.83 cm −1 and 2981.41 cm −1 . Transmission electron microscopy (TEM) analysis showed the nanoparticles exhibited polydispersity with a size range of 10–100 nm, with an agglomerated morphology, suggesting successful enzyme-nanoparticle hybridization. The histogram was constructed based on the counting of nanoparticles with size which showed highest number of nanoparticles were in the range of between 10 and 20 nm. The BET analysis showed a surface area of 225.1 m 2 /g. The EZnO nanoparticles demonstrated effective detoxification capabilities, achieving 86 % removal of synthetic phenol, 63 % removal of synthetic 2-chlorophenol, and 69 % removal of their mixture within 24 h. These findings highlights the potential of L. camara L. fruit extract and EZnO nanoparticles for application in the detoxification of hazardous pollutants, offering a sustainable and efficient approach to environmental remediation.

Abstract licence: CC BY-NC

Hybrid composite materials combining polymers and reinforcements are gaining interest for enhanced engineering properties. The main goal of this study was to create the best hybrid composite using carbon fibers, zinc oxide micro- and nanoparticles, epoxy, phenol-formaldehyde resin, and more. Samples with varying ratios of epoxy resin (50–100%) and phenol-formaldehyde resin (0–50%) were fabricated. Mechanical and water absorption testing evaluated the effects of the zinc oxide particles and carbon fibers on tensile strength, elasticity, and liquid resistance. Results showed improved tensile strength and minimized water absorption at 10% phenol resin content. Further, zinc oxide nanoparticles offered better reinforcement than microparticles, attributed to higher surface area-to-volume ratios. However, carbon fiber addition increased water absorption despite improving tensile properties. In the end, the best composite was made up of carbon fibers, zinc oxide nanoparticles, 90% epoxy resin, and 10% phenol-formaldehyde resin. This affordable hybrid composite has potential applications in sewage system piping. Further work should focus on improved mixing methods to leverage synergies between the composite constituents. The study provides valuable insights into tuning hybrid composites with nanoparticles and fibers for advanced functionality.

Abstract licence: CC BY